混凝土自動上料攪拌車的使用維護保養要點 - 行業動態_新聞資訊-山東山汽工程機械(集團)有限公司

站內搜索

新聞資訊

公司新聞行業動態

熱點推薦

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車品牌這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

混凝土自動上料攪拌車的使用維護保養要點

所屬分類：行業動態發布時間：2022-10-10 來源：http://www.wlyixing.com/ 瀏覽量：18

隨著我國建設的快速發展，人們對混凝土自動上料攪拌車的需求也不斷變大，但是，混凝土自動上料攪拌車是一種特殊車輛，并不是所以的人都能夠對其完全掌握。但是，要想提高混凝土自動上料攪拌車的壽命和工作效率，還是要做好其維護保養工作。下面，小編就給大家介紹下混凝土自動上料攪拌車的使用維護保養要點。

With the rapid development of China's construction, people's demand for automatic concrete loading mixer is also growing. However, automatic concrete loading mixer is a special vehicle, and not all people can fully master it. However, if you want to improve the service life and working efficiency of the automatic concrete feeding mixer, you should do a good job in its maintenance. Now, Xiaobian will introduce the key points of the use and maintenance of the automatic concrete feeding mixer.

一、液壓驅動系統維護

1、 Hydraulic drive system maintenance

液壓系統可以說是混凝土自動上料攪拌車的核心系統。為保證混凝土自動上料攪拌車能正常工作，攪拌罐能運轉正常，須在每次車輛發動前檢查油路散熱器和減速機的液壓油位，保證油位指示在視窗范圍內。同時要保證其清潔性，以免塵粒和水分等污染系統液壓油，造成系統不能正常工作或損壞。

The hydraulic system can be said to be the core system of the automatic concrete loading mixer. In order to ensure that the automatic concrete feeding mixer can work normally and the mixing tank can operate normally, the hydraulic oil level of the oil radiator and reducer must be checked before the vehicle is started each time to ensure that the oil level indication is within the scope of the window. At the same time, ensure its cleanliness to avoid contamination of the hydraulic oil of the system by dust particles and moisture, which may cause the system to fail to work normally or be damaged.

二、供水系統維護

2、 Maintenance of water supply system

氣壓供水系統加水量一般在水箱的四分之三處為宜；車輛在行駛時水路系統中各個閥門均應處于關閉狀態，以免影響車輛的制動性能，或燒結摩擦片，從而影響車輛的制動性能。禁止隨意焊動和改動水箱，避免重物撞擊；經常檢查閥體是否堵塞或是否有工作異常；在有結冰可能的環境中使用時，供水系統須排空存水，防止管路凍裂；經常檢查系統的密封性，拆卸修理后，關鍵部位要涂螺紋密封膠。

The water volume of the pneumatic water supply system is generally three quarters of the water tank; All valves in the waterway system shall be closed when the vehicle is running, so as not to affect the braking performance of the vehicle, or sinter friction plates, thereby affecting the braking performance of the vehicle. It is prohibited to weld and change the water tank at will to avoid heavy objects; Check the valve body frequently for blockage or abnormal operation; When the water supply system is used in an environment with the possibility of icing, the water storage must be drained to prevent the pipeline from freezing; Check the tightness of the system frequently. After disassembly and repair, apply thread sealant to key parts.

三、攪拌筒維護

3、 Mixing drum maintenance

初次使用要及時檢查罐體及別的部位螺栓是否有松動，每天行車前要檢查托輪與滾道的潤滑，每個月打開一次托輪護罩，清理內部的油污并添加潤滑油脂。

For initial use, timely check whether the bolts on the tank body and other parts are loose. Before driving every day, check the lubrication of the supporting wheel and raceway. Open the supporting wheel shield once a month, clean the internal oil stain and add lubricating grease.

以上就是為大家介紹的有關自動攪拌一體車的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.wlyixing.com/

The above is a detailed introduction to the automatic mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://www.wlyixing.com/

上一頁：自動上料水泥攪拌車漏油怎么辦？下一頁：混凝土自動上料攪拌車維護保養秘訣

熱門產品 / HOT PRODUCT