在我們的生活中,混凝土攪拌車是用于運輸混凝土的特殊車輛,通常在該車輛后方裝有一個大罐來攪拌混凝土。但是,由于需要長期清潔車輛內部的混凝土,因此下面介紹具體的清潔方法。
In our life, concrete mixer is a special vehicle used to transport concrete. Usually, a large tank is installed at the rear of the vehicle to mix concrete. However, since the concrete inside the vehicle needs to be cleaned for a long time, the specific cleaning methods are described below.
1.準備應急驅動軟管,關閉攪拌車,并卸下液壓馬達的高壓油管接頭。
1. Prepare the emergency drive hose, close the mixer truck, and remove the high-pressure oil pipe connector of the hydraulic motor.
2.拆下高壓油管,并用緊急驅動軟管將其連接到故障汽車的相應接頭。
2. Remove the high-pressure oil pipe and connect it to the corresponding connector of the faulty vehicle with the emergency drive hose.
3.對于發動機攪拌車,將控制手柄轉到卸料位置,以去除攪拌車內的混凝土。
3. For the engine mixer, turn the control handle to the unloading position to remove the concrete in the mixer.
4.應急驅動器完成后,卸下驅動器軟管,將車輛恢復到原始狀態。
4. After the emergency drive is completed, remove the drive hose and restore the vehicle to its original state.
由于您中有些人可能已經知道如何清潔混凝土攪拌車內的混凝土,因此更要了解這些知識,以防止在使用過程中出現故障對設備正常運行的影響,我希望您能夠做到這一點。
Since some of you may already know how to clean the concrete in the concrete mixer truck, you should know more about this knowledge to prevent the impact of failure on the normal operation of the equipment during use. I hope you can do this.
The above is a detailed introduction to the automatic mixer. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.wlyixing.com/